You can find our product prices on the "Price List" page of this website.

                                                                           Below are descriptions and photos of some of our products.

                     These additional items can be found on the "Price List" page
                                 Treadle Tie Cords and Texsolv systems                                  Cloth/Warp Beam Replacement Straps
                                Compact Loom 2 nd Warping Beam Systems                          Standard Raddles
                                Steel Heddles (either Flat Steel or Inserted Eye)                     Stainless Steel Reeds
                                Bobbins                                                                                        Some Instructional Aid Materials
 
                     or for more items go to the "Parts/Materials" page.

                                               Gilmore Spool Rack

           Made of solid hardwood maple, this spool rack has TEN - 3/16" steel pins that can be removed individually. Each pin locks in so the turning spools will not release it. Each section will hold 3- 4 1/2" paper or plastic spools, or a total of 30 spools altogether. In addition there are 4 pegs on the bottom that will hold yarn cones. Combined with the Gilmore Tension Box you have a perfect way to do sectional warping.
                                                                               

                                                                                      Gilmore Bench                
 The Gilmore Bench is made of solid hardwood maple. The top is 13 1/2 in. x 30 in.. The bench is tilted to the front making it easier on your back and to allow more comfortable treadle contact.  Bench height is 22 1/2" in the front and 23" in the back. The drawer has maple ends and poplar sides and It slides through both ends for easier access.
                                                                                       

                                                                                           Front/Back Raddle
 The Front/Back Raddle is a raddle that can be mounted on either the front (breast) beam or the back top beam. It will fit all Gilmore Compact looms. When mounted on the beams it can be set to be an open raddle or a closed raddle. It comes with a set of special clamps that will not hurt the beams. It can also take the place of the reed in the shuttle race reed slot.
                              Mounted closed raddle            Mounted open raddle

                                                            Warp Tensioner
The Warp Tensioner attaches to the back top beam of the Gilmore loom. It comes with three different dent reeds that are used for different sized threads, or "ends per inch". By  varying the way you wrap the threads around the guide dowels you can vary the tension of the  treads for sectional warping.
                            .                               

                                                                                                               Shuttles

                                                                                                             BOAT SHUTTLES
                                                  
                                        Gilmore boat shuttles are made from hardwood maple.  Pictured above are the 4 main types.
A1, A2  The large shuttle can either hold one long spool (A1) or can hold two small spools (A2). It is 1 1/4" high x 1 7/8" wide x 16 1/2" long.
B    The medium shuttle holds one small spool and is 1 1/4" x 1 7/8" x 13 1/2" long
C   This is a small shuttle that is still large enough to hold a small spool. It is 1 1/4" x 1 7/8" x 10 1/2" long.
D    This is a small "K" shuttle specially designed by Kertis. It rides well next to the reed along the shuttle race, taking advantage of the most shed. It also holds a small spool and is 1 1/4" x 1 7/8" x 10 1/2" long.

                                                                                                  Rug and Stick Shuttles  
                                                                         
                                         Rug Shuttles are made from hardwood maple and maple dowels. Stick shuttles are made from poplar.
A   large rug shuttle A (above) is 1 3/4" wide x 2 5/8" high  x 20" long.
B   small rug shuttle B (above) is 1 3/4" x  2 5/8" x 10" long.
C   stick shuttle C (above) is 1/4" thick x 1 1/4" wide x 13" long.
 
                                                                                               Inkle Type Shuttles

                                                         12 Yard Warping Frame
The Warping Frame is extremely strong and will hold 12 yards. It is designed to allow a lease cross at the bottom, the top, or both. The basic frame is made of 1 1/2 x 2 1/2 inch thick poplar.  The joints are mortise and tenon and the outside dimensions are 29 inches x 38 1/2 inches. The 20 dowels are 7/8" hard maple and extend 6 inches up from the frame.
                     .                       

                                 Small Collapsing 4 1/2 Yard Warping Frame
 Perfect for short or narrow warping projects, Inkle Looms, and table looms. Made of beautiful grained oak hardwood with a lacquer finish. The 4 parts easiy  slip together to form a strong frame tightened securely with easy to turn knobs that also serve as feet. The 12 dowels are 1/2" hard maple and extend 5 1/2 inches from the frame. The outside dimensions are 22" X 20".
                                                    

                                                           Warping Wedge
      The Warping Wedge is another need to have tool for warping. A Warping Wedge placed under the frames or shafts will lift them in a stairstep pattern.  In this position it is easy to see which frame's heddles you are working on.
Warping Wedges can be placed to lift front to back or back to front. It will work on all Gilmore looms.
These are an inexpensive must accessory and have been a big hit at CNCH Conferences. 
                                                                      
                                    

NEW Item  Shuttle Shelf
The Shuttle Shelf is made of hard maple. The shelf surface is 12 inches long and 4 1/2 in. wide with a  lip on either side. It has a clamp on the bottom that can widen out to 2 1/2 inches so it can fit many places such as a tray or beam. It is ideal for a shuttle or two to rest on while weaving.
     

Instructional Help

Book:
     "Learning to Weave", by Deborah Chandler.  An excellent beginning weaver's book. Learn weaving terms and basics from start to finish. This book will take you slowly through the processes of measuring and getting a warp completed. Then getting it onto a loom, either using the front-to-back or the back-to-front method, and getting you weaving. Lots of pictures and several weaving projects.   (232 pages)
VHS or DVD:
     "Beginning Four Harness Weaving, by Deborah Chandler.  Instructional course for beginners that takes you from measuring your warp to getting it set up on a loom. You will learn how to read patterns and do several different weaves, including doubleweave. This video is a stand-alone or a companion to the book above.  (86 minutes)
 

                                                                                                 Kromski
                              spinning and weaving products

Gilmore Looms is proud to offer a full line of Kromski products. We have found these products to be of excellent quality craftsmanship and price. Below we list a few of our favorites.
Spinning wheels
The Kromski company makes several spinning wheels which vary in their design and operation. The wheels are named the Prelude, the Minstrel, the Polonaise, the Mazurka, and the Symphony. All are made of beautiful European alder and birch hardwoods with no plastic parts. The standard bobbins used on these wheels are all the same size. These spinning wheels come boxed as a kit but go together quickly and easily, especially with the helpful included video. You can order them unfinished, or finished with an exceptional clear, walnut, or mahogany finish.
A Quick Change Flyer Set is also available for all but the Prelude spinning wheel. This will make changing bobbins on a double drive set-up easier. The spindle on the flyer "breaks" at the base of the flyer allowing you to pull off the flyer and the bobbin without removing the whorl or the drive band from the whorl. The Quick Change Flyer requires different bobbins than the standard ones.

                                                                                                   THE PRELUDE
We find that the Prelude is our favorite for smooth easy operation, and price. It has the look of an antique wheel and the high degree of wood turning that the Kromskis are famous for, but it also has all the touches modern spinners expect. The Prelude is a single drive wheel and uses the same bobbins as all the other Kromski wheels.
                                                                 
                                                 The Prelude                                        Prelude folded up
The Prelude is easy to treadle, easy to transport, and has an 18" diameter wheel for excellent ratios. If you like, you can swivel the mother-of-all in line with the bench for a more compact "package" when moving the wheel or for storage.
The Prelude is made of European alder and birch.
 Additional specifications:
• 18" wheel diameter
• orifice height- 26";  size- 3/8"
• full 4 oz. bobbin size;   (3 bobbins are included)
• ratios: 6 to 1, 10.5 to 1,  and 13 to 1
• bearings on the wheel shaft and bobbins;   leather bearings on the flyer
• includes threading hook, attached Lazy Kate, and bottle of spinning wheel oil
• in addition to a regular hemp drive band an elastic band is included that is dyed to match the walnut or mahogany stain finish
• included is a video demonstrating assembly and instructions on how to use the Prelude
• weight-   9 lbs.
                                                                                                   THE MINSTREL
                                                                                                          (optional distaff)
A double treadle upright wheel that comes in a complete package. The diameter of the wheel is larger than most uprights and comes with a built-in Lazy Kate, and optional distaff. This wheel features both double drive spinning and Scotch tension set-up for single drive feel.
Specifications:
• 18" wheel diameter
• orifice height- 33";  size- 3/8"
• full 4 oz. bobbin size;   (3 bobbins are included)
• ratios: 6.5 to 1, 8.5 to 1, 12 to 1, and 16 to 1   (2 whorls included)
• bearings on the bobbins and crank;   leather bearings on the flyer
• includes threading hook, built in Lazy Kate, spinning oil, and an excellent video
• weight-   13 lbs.
 
                                                                                                   THE POLINAISE
                                                                                   
 A magnificent and stately wheel, The Polonaise has the look of wheels from the Baltic area of Poland and Scandinavia. It has a threaded wood wheel adjustment so the proper angle with the flyer can be achieved. The "pin and socket" bearings support the wheel, giving it low friction and exceptional ease of treadling. Double drive and Scotch tensioning are standard.
Specifications:
• 24" wheel diameter
• orifice height- 25";  size- 3/8"
• full 4 oz. bobbin size;   (3 bobbins are included)
• ratios: 8 to 1, 12 to 1, 16 to 1, and 20 to 1   (2 whorls included)
• bearings on the bobbins, treadle and wheel;   leather bearings on the flyer
• includes threading hook, tensioned Lazy Kate, spinning oil, and an excellent video
• weight-   16 lbs.
                                                                                                    THE MAZURKA
                                                                               
The Mazurka has the look of an old eastern European spinning wheel. The Mazurka design won recognition for Leon Kromski throughout Poland. It is an easy traveling wheel with excellent treadling action. It features both double drive and Scotch tension spinning.
Specifications:
• 16" wheel diameter
• orifice height- 32.5";  size- 3/8"
• full 4 oz. bobbin size;   (3 bobbins are included)
• ratios: 6 to 1, 8 to 1, 10 to 1, and 12 to 1   (2 whorls included)
• bearings on the crank and bobbins;   leather bearings on the flyer
• includes threading hook, tensioned Lazy Kate, distaff/nostepinne, spinning oil, and an excellent video
• weight-   9 lbs.
                                                                                                   THE SYMPHONY
                                                              
The Symphony shows a solid Saxony look that many people associate with spinning wheels with beautiful turned wood.  The effortless double treadling is engineered to last through long spinning sessions. The flyer is double drive but also has  Scotch tensioning.
Specifications:
• 24" wheel diameter
• orifice height- 27";  size- 3/8"
• full 4 oz. bobbin size;   (3 bobbins are included)
• ratios: 7.5 to 1, 10 to 1, 16 to 1, and 20 to 1   (2 whorls included)
• bearings on the crank and bobbins;   leather bearings on the flyer
• includes threading hook, tensioned Arch Lazy Kate, spinning oil, and an excellent video
• weight-   15 lbs.
                                                                                       THE SONATA (
                                                                            
                                                               
                                     side view                                Mother-of-all                                   folded                             padded carrying bag
The Sonata is a full size spinning wheel that folds for easy storage and set-up. Double treadles provide plenty of foot room with the smooth easy treadling known to be provided with Kromski wheels. Optional flyers can add to the total range of the Sonata. The Jumbo flyer offers lower ratios and a larger orifice - .70" - and the Faster flyer increases the ratio range of up to 18:1.  A custom-made, heavily padded bag from Kromski now comes with the Sonata for travel or storage.  An individual bag is also available if you do not have one. 
Specifications:
• 19" wheel diameter
• folded dimensions: 22" by 19"
• orfice height - 30" (but can be raised as much as 2")- size 3/8"
• bobbin size - full 4 oz. (3 are included and will fit other Kromski wheels)
• includes threading hook, attached Lazy Kate and a bottle of spinning wheel oil
• uses an elastic drive band
• Ratios: 6.7, 12.5, and 14 to 1
• ball bearings on wheel crank
• padded carrying bag
• weight 11.5 lbs.
• available in a clear finish and as available walnut finish
 

Rigid Heddle Table Loom:  The Harp
                        The Harp                                                    The Harp folded up                 Warping on the back              (Optional) Harp Floor Stand and Tote Bag
In 2002 the Kromskis have added an innovative rigid heddle loom with several innovative features. The Kromski Harp has a warping board integral to its design; turn over the loom and you can make your warp (five yards plus). When you get ready to travel, take your Harp with you; it folds to be more compact (with the warp attached) and fits neatly into the Kromski tote bag (optional).
The Harp is made of European alder wood with a clear finish.  Your Harp comes with a 10-dent heddle, 2 stick shuttles, a pick-up stick, threading hook, 2 clamps,  warping board pegs and the very helpful “warp helper”. Also included is an excellent video that explains assembly and how to set up and weave with the Harp.
The Harp is available in 16", 24" and 32" widths (actual weaving widths are slightly smaller).
The Kromski Tote, extra heddles, extra heddle blocks (for more complex weaving) and Stand are available separately

The optional Floor Stand allows you to work off the table. There are places to store the pegs that make up the back warping board. The stored pegs form a ledge to hold shuttles, yarn or other supplies. The Harp can be folded on the stand for storage. The Stand comes in 16", 24" and 32" sizes to fit the three available Harp widths.
The Tote Bags are made of polycanvas and feature canvas handles and a shoulder strap. The base of the tote is re-inforced to provide sturdy support of your loom with its warp held in place. And there is still plenty of room for lots of other weaving materials. Tote Bags come in three sizes for the available Harp widths.

Note: the 32" Harp does not have an arch on the heddle; manufacturing constraints makes shaping the wood for this size impractical.
The Harp comes boxed as a kit but goes together quickly, especially with the helpful video

 Tensioned Lazy Kates
                                               
                                                                      Upright Tensioned Kate                                  Arch Tensioned Kate
The Lazy Kate holds up to three bobbins. The bobbin rods are heavy metal with a fancy wooden knob on the end. The tensioned Kate will accommodate most other brands of bobbins including Ashford (standard bobbins), Jensen, Reeves, Timbertops, Majacraft and Lendrum (regular and very fast bobbins).
The Upright Kate and the Arched Kate come unfinished.
An Upright Kate is included with the Polonaise wheel, and an Arched Kate is included with the Mazurka and Polonaise spinning wheels.

Nidy Noddies, Bobbins, Nostepinne, and Spinning Stool
                            
You can't spin without having a Niddy Noddy. The Kromskis make three sizes for three different size skeins: 30", 48" and 72". The two smaller sizes are available in walnut and mahogany. The large Niddy is available unfinished, with a clear finish, and with a walnut or mahogany stain finish.
The sturdy Spinning Stool has a contoured seat that will let you spin for hours. The legs allow adjustments from 17" to 18.5" in seat height. Available unfinished, or finished in walnut or mahogany.

                                                                               Small Mazurka mini spinning wheel
                                                                  
The Small Mazurka is a scaled down version of the Mazurka and while it has the look of a working wheel it lacks a functional flyer. But everything else works. The treadle drives the wheel which in turn spins the flyer, but there is no orifice or working bobbin. It stands about 24" tall and the wheel is 9.5" in diameter. It comes in finished colors.